Thread: New Product Official Eflite UMX Beast 3D
View Single Post
Old Nov 16, 2012, 09:25 PM
jevs is offline
Find More Posts by jevs
Registered User
United States, MO, Union
Joined Sep 2012
197 Posts
Quote:
Originally Posted by chasingair View Post
Considering getting one of these to throw around out front. Ill be using the 3 cell set up with batts in the 180 mah size.

My only confusion at this point is the connectors used on the beast. I know e flite has there own and its a three wire set up I believe ?

The batts I want to get are the normal type with a red and black and the balance plug....
I believe you will need to change the connector in the plane to match your battery. I beleive it is 3 pin JST-PH Female in the plane. Depending on your battery you may want to change to a red 2 pin JST. Your 3S will likely have a 4 PIN JST-XH male balance plug and a 2 pin red JST. Of course this depends on what battery u get.
They make an adapter for this also, but i would do it with just changing the connector to save weight
jevs is offline Find More Posts by jevs
Reply With Quote