View Single Post
Old Nov 16, 2012, 05:38 AM
Isoprop is offline
Find More Posts by Isoprop
Registered User
Joined Nov 2010
2,865 Posts
Originally Posted by rafael73 View Post
I've read lots of posts but did not find an answer to my question:
is there a firmware for #11 V2 that supports Stop/Save/Continue function?
I tried to make recording with external power supply but got only one 4Gb file. Then yellow led lights up and recording stops.
What are possible ways to make long recording that fill the whole 32Gb memory card?
I don't have a #11 V2, but S/S/C has always been supported. However, you need a "special" cable if you want to use external power. The 8 pin connections have been posted several times.
Here's the link.

You can use the normal cable if you connect the cable after you have started the recording - at least that's the way it works with the V1.

IMO, the #11 and #18 were badly designed for use with external power. The #16 can use external power using any standard cable.
Isoprop is offline Find More Posts by Isoprop