Thread: Discussion New Eclipse 2.4 PRO?
View Single Post
Old Nov 15, 2012, 03:20 PM
A.T. is offline
Find More Posts by A.T.
Registered User
Joined Aug 2002
5,811 Posts
If Normal setting does not work, see attached, try setting an E7 / E7 Pro model up
as an Acro which disables all Heli settings.
. Select a new model
. Enter main menu, select "REST" < depress both data buttons together, this to clear any extraneous data.
. Still in main menu, check that model number is set to "Acro" & "PPM", rename model as "Phoen" or "Sim" etc.

By not using any the mixes in the Transmitter, user can fly all the Acro & Heli in Phoenix Simulator with
same model - the different setups are applied within the Phoenix setup window:
.. Click System/ < Your Controls < click on the profile to be configured & click Configure Profile button.
.. All live values from transmitter being input will be showing.
. . Look for the invert column, click Engine and Collective Pitch in that column to reverse the channels in need.
Then use the Phoenix on screen set up for heli functions, as in post #35 above:
" . Heli setup Q&A Post #3 this thread"

Alan T.
A.T. is offline Find More Posts by A.T.
Last edited by A.T.; Nov 16, 2012 at 04:58 PM. Reason: attach .jpg
Reply With Quote