View Single Post
Old Nov 15, 2012, 10:38 AM
_Phoinix_ is offline
Find More Posts by _Phoinix_
Registered User
Joined Aug 2012
6 Posts


I solved the problem with a trick:

1. Open the tank to get access to central control.
2. Locate the cable connected in the port named "M. Gun".
3. Unplug the cable.
4. Turn on the tank and verify if the states became normal again.
5. Turn off the tank.
6. Plug again the cable.
7. Cover the tank. That's finish!

I attached a picture showing the plug.
_Phoinix_ is offline Find More Posts by _Phoinix_