View Single Post
Old Nov 15, 2012, 05:39 AM
davereap is offline
Find More Posts by davereap
Registered User
davereap's Avatar
Ashford. Kent. England
Joined Feb 2005
7,514 Posts
decor done...the whole model is taped over...clear tape is used over the white areas
The tape added 1 3/8oz ..38gms to the model.... its now at 11.25oz including the 4x 9gm servos...so it looks like mine will be about the 21oz when done when using a 2200 battery
Below is a sketchup trace over that might help if anyone wants to make a different sized Mako..
I like sketchup for scaling models and printing...however a very good and easy to use alternative is the ScaleAndTile3 program from bill segraves

edit....its all done ...with a 2212-06 and a 6x4 prop... draw is 24A static ...AUW a bit high to the spec , at 25oz with a heavy 2200 30C lipo..The radio is set is all programmed with the recommended travels and expo, all sorted nice...
davereap is offline Find More Posts by davereap
Last edited by davereap; Nov 17, 2012 at 02:50 PM.
Reply With Quote