View Single Post
Old Nov 15, 2012, 01:17 AM
Sandav is offline
Find More Posts by Sandav
Time to learn to fly
Sandav's Avatar
Netherlands, Overste, Zwolle
Joined Feb 2012
221 Posts
Here's another update. Time to paint and put it all together.
It's gonna be all matt black. That's not only the same color as the NanoWii pcb but it also helps flying in direct sunlight, no flashing sunlight bouncing of the frame.

First I need to mask the parts of the power board where eventually, the esc will be connected.
Name: masking.jpg
Views: 75
Size: 116.9 KB
Description: Name: masking overview.jpg
Views: 82
Size: 203.9 KB
Description:

After that it's straight forward.....
Name: bottom painted.jpg
Views: 87
Size: 218.6 KB
Description: Name: frame arms painted.jpg
Views: 112
Size: 231.6 KB
Description:

Soldering on the LiPo connector
Name: bottom with lipo connection.jpg
Views: 110
Size: 260.8 KB
Description:

and putting it all together..
Name: overview assembled.jpg
Views: 106
Size: 220.8 KB
Description: Name: close up assembled.jpg
Views: 106
Size: 205.5 KB
Description: Name: close up1.jpg
Views: 97
Size: 247.3 KB
Description:

That's it for now. I'm out of material , but there are three packages from Hobbyking waiting for me at the post office .
Motors, esc's, shrink wrap, usb programmer for my SiLab based esc's (for this build I use F-20A's).
The only things that are in the mail are headers for the NanoWii and flatcables for connecting the rx to the NanoWii.
Sandav is offline Find More Posts by Sandav
Reply With Quote