Originally Posted by BJM-Maxx
Has there been any news on a possible firmware update for using the Guardian as a gimbal controller? I bought a second Guardian and would really like to try this out.
Try it as-is. You will probably want 2D mode to keep the camera level, or at your selected angle. For best results disable heading hold and zero the derivative gain to minimize jitters. That should stabilize fairly well on the roll and pitch axes. You might experiment with the Guardian mounted on the gimbal vs. the platform. The yaw axis is problematic as 2D mode rolls the plane to hold heading so with heading hold on you will get tilt as the heading changes and with heading hold off you will get nothing with heading changes.