Thread: Discussion New bimRC Ducted Fan Line
View Single Post
Old Nov 14, 2012, 11:25 AM
Freddie B is offline
Find More Posts by Freddie B
Addicted to building...
Freddie B's Avatar
Omaha Nebraska
Joined Feb 2006
5,999 Posts
Thank you Bob Selman, and BSD Micro RC, LLC

First, thank you to Bob Selman for a great response on brushed 7mm can motors. I am sure you have all heard of Bob, and he has been a great supporter and inovator of micro RC for years. Do visit Bob's website at BSD Micro RC, LLC.

According to Bob, he does carry the quality 7mm motors from Walkera and is a USA Distributor of these and other quality products. Here is the response on the 7mm motors:

My Long Can 7mm motors are the Walkera motors. Their resistance is 1.4 ohms.

Orange 3.3 ohms Didel/Super Slick

Red 2.3 ohms Didel/Super Slick

Blue 1.7 ohms Didel/Super Slick

Long Can 1.4 ohms Walkera quadracopter

Black 1.1 ohms Flyzone Playmate

Lower resistance means higher Kv. I do not have any quantitative data though.

Bob


Not only did Bob answer all my questions with great information, he also pointed out something we can all be grateful for. Note above that Bob has tested the Black Flyzone motors from the Playmate, AND included that information to help us all out. This is a 1.1 ohm motor and the hotest wind I have any knowledge of. UNGN is using these on his tests, and I had ordered some myself. I now have my Flyzone motors and will test them against the AH motors I already tested.

Thanks again Bob, and I thank you for all the great information and helpful nature you are known for.

Fred
Freddie B is offline Find More Posts by Freddie B
Reply With Quote