Originally Posted by Bob6831
Yes, elevator moves up when I move the Tx stick down.
I tried the 'glide' test WITHOUT any power on. Not sure I can go far enough to be able to use the Tx before hits the ground.
Note that it seems to be better when I have moved the CG BACK a little, such that it is about in the center of the spar. I had it about at 2.25 inch from LE and now is about 3 inches from LE - leading edge of wing. Note that it appears from different users that this can vary a lot.
FWIW, the manual recommends 58-62 mm, which is about 2.2-2.4 inches. That's worked well for me.