View Single Post
Old Nov 13, 2012, 09:08 AM
bill_delong is offline
Find More Posts by bill_delong
Did I make the A Main?
bill_delong's Avatar
Austin,TX
Joined Mar 2009
1,503 Posts
while removing the wheels from my SB5 last night, I discovered the stock glue was not holding up very well after only 1 battery pack ran through the bike:



The acetone dunk overnight easily removed the remaining glue and the tires peeled right off effortlessly without causing any damage to the stock wheels, tires or foams. It turns out that the stock front foams from Thunder Tiger are harder than the PMT's, but the rear PMT foams are harder than the stock Thunder Tiger:



I plan to take the bike back out to the track again this weekend and have my fingers crossed that the new tires will make a difference to make sharper turns
bill_delong is offline Find More Posts by bill_delong
Reply With Quote