View Single Post
Old Nov 12, 2012, 08:35 PM
nickwad is offline
Find More Posts by nickwad
Nine inch member
nickwad's Avatar
Thailand, Chon Buri, Bang Lamung
Joined May 2006
234 Posts
Originally Posted by nickwad View Post
I have done as suggested but it is beeping and showing lost signal in MK tools.
I have bound the receiver and checked with a servo, I have changed to multisignal ppm in MK tools.
I connected the white wire to the RX pad on the FC board , the black to ground and the red to 5v. The receiver is powered ok.
The jeti pad are not bridged and I have removed the Spektrum sattelite.

Any ideas what could be wrong please?
I have now tried soldering the signal wire to the PPM pad on the flight control but this has made no diference, the reciever is powered and bound , calibrated etc but the MK is still showing lost signal.
I am using ch 12 on the DL rec, and have changed the rec to multisignal PPM in MK tools.

Please has anyone got any experience of running DL on an MK ?
nickwad is offline Find More Posts by nickwad
Reply With Quote