Thread: Mini-HowTo mini regulator - going SMD
View Single Post
Old Nov 12, 2012, 01:36 PM
Dani123 is online now
Find More Posts by Dani123
Registered User
Dani123's Avatar
Israel
Joined Jan 2005
145 Posts
one last thing - my test bench

Just wanted to introduce my 'high tech' test bench for the stuff I do.

I have this servo tester which can cycle continuously three servos, I feed it with 2s lipo through the regulator, I monitor the voltage at the input (left meter) and at the output (right one), also I measure the total run time with the timer and I check the regulators temperature (by hand) - it should get warm but I should be able to touch it. Once this setup works for 2-3 hours, I feel comfortable to put the reg in my DLGiis.

Dani
Dani123 is online now Find More Posts by Dani123
Reply With Quote