Thread: Help! tail rotor not spinning
View Single Post
Old Nov 10, 2012, 05:41 PM
xtian3188 is offline
Find More Posts by xtian3188
Tuguegarao City Philippines
xtian3188's Avatar
Joined Sep 2012
381 Posts
disconnect the tail motor and apply voltage to it. if it did not spin, there's your problem. if it spins, check if you have voltage on the tail motor port on the pcb. if there's no voltage, there's your problem. if there's voltage, check the wire from the pcb to the motor if there is continuity along its length. if there's no continuity, rewire it.

dont forget to power up your heli and disconnect your main motors.
xtian3188 is offline Find More Posts by xtian3188
Last edited by xtian3188; Nov 10, 2012 at 05:48 PM.
Reply With Quote