View Single Post
Old Nov 10, 2012, 02:21 PM
majik01 is offline
Find More Posts by majik01
Registered User
Joined May 2010
75 Posts
Quote:
Originally Posted by albe359 View Post
ok perfect,today i fly all is good,frame are very stable...i have aux1 and 2...but can tell me what i must active for make poshold,rth... ...in wingui level l m h what mean??thanks
If you watched the YouTube video as adviced, you would have figured that out already .... to answer your question L is Low 1000, M is Medium 1500 and H is High 2000. On the Reatime tab if your Aux 1 and 2 are connected and WinGui is activated properly, you should see Aux 1 and Aux 2 line move as you toggle the switches. Assign functions to those switch positions (M and H would usually be the choice unless you mix a three pos switch to be L M H ). If you do not see any Aux channel move, review your radio's documentation to enable Ch 5, 6 or higher if you have those.

What kind of radio do you have and maybe somebody here can help with the programming ...
majik01 is offline Find More Posts by majik01
Last edited by majik01; Nov 10, 2012 at 09:16 PM.
Reply With Quote