Thread: New Product E-flite Taylorcraft 450
View Single Post
Old Nov 10, 2012, 12:46 PM
Mendo is offline
Find More Posts by Mendo
Registered User
Mendo's Avatar
United States, CA, Ukiah
Joined Dec 2011
793 Posts
Quote:
Originally Posted by GCplane View Post
If your SuperCub does not have ailerons, I suggest you cut and hinge some ailerons on the supercub or buy a foam Parkzone T-28 as your next step. Then Taylorcraft as your third step.
I used HiTec HS65HB for Ailerons and Elevator. HS65MG for Rudder because the tailwheel may get jarred when landing or transporting.
True, the HS-55 on rudder does stand a chance of stripping gears if something goes squirrely on the ground. I have HS-5055MG's all around running on 6v through a CC bec in it now, along with a CC pheonix 45, ar8000+sat, tm1000 telemetry module, and a bunch of telemetry goodies hooked up. Motor is a eflite park 480 1020kv swinging either an 11x5 or 12x5 Xoar. My original setup was a park 480 910kv, the HS-55's, CC Tbird 36, and the ar8000rx. Flew great with the original setup, flies better with the new one.

Mendo
Mendo is offline Find More Posts by Mendo
Reply With Quote