Originally Posted by turboparker
I simply mounted the cam to the square plate below the battery with a piece of Velcro. I used a strip of masking tape for backup. The reason for the low vibration level is that I carefully balanced each rotor.
Regarding sources for the #16 cam - be careful, as there are some fakes out there. (BTW - the #16 has the best 720p video of all the 808 cams.) Here is the
source for accurate information on all things keychain-cam related: http://www.chucklohr.com/808/index.shtml
Thanks thats how I do it and still a little vibes, what method do you use for balancing these props?
I orders one of the 808 #16V2 cams
used the recommended seller from that site you posted the link to, thanks again