Anybody order one yet. It looks good! 6s, 360mm blades.
That could be a good motor: http://www.hobbyking.com/hobbyking/s...dproduct=24433
It probably take same size servo as a 450 but not sure.
Anybody received one yet?
●New design 480 size helicopter, equipped with 325 to 360mm main blade and 22.2v power, if epuipped with 360mm main blade,can improve the wind resistance and flight control.
●Equipped with SDC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
●New main shaft block and servo mounting block to simplify main shaft and servo maintenance.
●Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most optimal CG position of the helicopter.
●Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
●New improved frame side plates with dedicated 3GY mounting location, to simplify wire management and overall aesthetics.
●New style gyro mounting platform with added length.
●Highly rigid and lightweight carbon side plates.
●New style tail control assembly for slop free tail, improving on rudder resolution and control precision.
●Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
●Highly efficient torque tube tail drive design, dramatically reduce power loss found on belt driven system.
●Streamlined design canopy.
●Main Blade Length:360mm
●Main Rotor Diameter:780mm
●Tail Rotor Dimeter:165mm
●Motor Pinion Gear:12T
●Main Drive Gear:121T
●Autorotation Tail Drive Gear:106T
●Tail Drive Gear:25T
●Drive Gear Ratio:1:10.08:4.24
●Weight(w/o main blade):540g
Lipo battery / 6S1P 22.2v 1200-1500mah
ESC / Up to 40A ,support 6S 22.2v
BLS Motor / Support 6S 22.2v 1600 to 1800KV
link for manual: http://www.alzrc.com/en/DownloadView.asp?/62.html