Originally Posted by kody'd'punk
Don't feel dumb when those TP packs last for way more cycles...
You're probably right but I was disappointed when my TP failed (like turning off a switch at about 165A). So I pulled out a second one, charged it up and viola! same fracking thing, only this time the shrink tube stretched so I could that see that the 4mm bullet pulled away from the wire because the solder melted (4mm is too small to support the supposed 65C)! It was the link connection between the split packs so not only did replacing the 4mm with a 6mm bullet fix the problem I picked up another ~5% in amperage. Initally the Revolectix was dominating but after the change the TP came out on top (but not by much).