Originally Posted by bvuaemal
I am intending to buy a hard deck --> to be installed in a fixed wing glider with prop in the front. The manual shows that the hard deck need to be installed with tubing etc (which makes it more complicated and less failure proof).
My question: If I install the hard deck module in the middle of the plane (not in a wing) - out of the wind - shielded by a canopy is then all the tubing required?
You could install the module anywhere you care. However the static pressure tube must be on the wing outboard of the prop wash. You would still need the tubing to connect the static pressure tube to the hard deck module.