View Single Post
Old Nov 03, 2012, 12:24 PM
Crash Survivor is offline
Find More Posts by Crash Survivor
Heli Crash Survivor
Crash Survivor's Avatar
United States, AR, North Little Rock
Joined Feb 2011
1,408 Posts
I put a HM-V120D06-Z-09 tail motor on my MCP which has a HP05S main I took off my crashed V100D08. Tail on hard pitch pumps & ever thing is rock solid no more blow outs. Also rldeveer thanks for the tip on getting those hyperions 320mah batteries to fit in the MCP stock battery cage/skid. Haven't done it yet still using the stock 350mah from my V100D08 which are a perfect fit on stock MCP skid. With the HP05S & 350mah I get a good 3 minute flight time. Think I'll will be trying soon to get my 600mah to fit some way on the MCP I use on my V120D02's.

rldeveer solution below for those 320mah.

I have one skid modified to use this battery, that I keep on one of my 2 BL Mini/Genius'. Heated a pair of needle nose pliers and inserted where batt goes and applied pressure in the open position. Take it slow and keep working it. After widened, cut out the bottom ribs so it can clamp onto the batt. Getting a good solid 5:30 compared to 3:00 on the 240mah. Worth having a special skid IMO. Easy to change on a Mini.
Crash Survivor is offline Find More Posts by Crash Survivor
Reply With Quote