View Single Post
Old Nov 02, 2012, 09:14 PM
brontide is offline
Find More Posts by brontide
Stop me before I build again!
United States, NY, Albany
Joined Sep 2012
1,320 Posts
My spider is 3/8 inch alu c channel and 1/8 birch plywood. All cuts are squared, no angled cuts at all. Arms are 2x10" and 2x9.5" center plate is one 6x12 inch plywood cut down the center. Front is 120 degree arm angle and back is 90 degrees.
brontide is offline Find More Posts by brontide
Reply With Quote