View Single Post
Old Nov 02, 2012, 04:52 AM
Bart83 is online now
Find More Posts by Bart83
71% of the world is runway . .
Bart83's Avatar
Nederland, ZH, Oostvoorne
Joined Jun 2009
2,441 Posts
Start build

Now that the work on the desing is finished its time to cut some wood.
I got the plans printed and have started on the box framework.

The first trouble i had was cutting nice square and straight 5x5mm stringers cause when i tried to cut them the blade kept tracking the grain of the balsa.
Solution was to cut it in multiple phases bij letting the stripcutter go over a 2.5mm sheet, this was the first cut was only half way and then it was straight.

Also have most of the electrics in , stil waiting on the GWS 9x7 3 blade props.
Does annyone know if there are any other 9x7 3 blade props wich look like the deHaviland variable pitch prop ?

More when my CNC-parts arrive.

Cheers,

Bart

Name: S23 (8).jpg
Views: 119
Size: 181.0 KB
Description: Wood stripper Name: S23 (9).jpg
Views: 94
Size: 252.0 KB
Description: 5x5 Balsa stringers Name: S23 (10).jpg
Views: 106
Size: 138.9 KB
Description: pinned down !!

Name: S23 (12).jpg
Views: 100
Size: 167.0 KB
Description: One side . . . . Name: S23 (13).jpg
Views: 107
Size: 191.6 KB
Description: This was a bit challenging to keep it straight Name: S23 (22).jpg
Views: 2005
Size: 188.9 KB
Description: Complete boxframe

Name: S23 (28).jpg
Views: 840
Size: 168.3 KB
Description: 2 sheets fill up my workshop :) Name: S23 (29).jpg
Views: 167
Size: 215.8 KB
Description: Electrics Name: S23 (30).jpg
Views: 837
Size: 205.9 KB
Description:

Name: Prop.jpg
Views: 123
Size: 122.0 KB
Description: Name: GWSEP9070X36P-450.jpg
Views: 98
Size: 4.7 KB
Description: GWS 9x7 3blade
Bart83 is online now Find More Posts by Bart83
Last edited by Bart83; Nov 02, 2012 at 05:04 AM.
Reply With Quote