Originally Posted by FyreSG
[B]V939 Transmitter (with a working top-right button)
At 100%, it does not flip. The only way to flip the quad is to press and hold the top-right button and apply full stick movements.
At 60%, holding the top-right button, and apply full stick movements, the quad flips.
V949 Transmitter (with a working top-right button)
Contrary to the manual, it does not flip at 60% while holding on to the top-right button! Flips are only possible at 100% while holding on to that button.
I'm confused. Are the transmitters all called E728? Is there anyway to tell them apart (the v93
9 and v94
It seems as if the ideal transmitter would be the v93
9 version if you could stop it beeping at 100%.
Could you ask Aaron (to ask WLToys) why the v94
9 Tx seems to have taken a step backwards (no flip at 60%) from the v93
I'd be tempted to get a BNF v949 when it's available and a v93
9 Tx, if I could be sure which revision of the Tx I'd get, but it's getting a bit messy.
Not even sure which version of the board the v929-06 actually is to 'upgrade' a v929 with.