View Single Post
Old Oct 26, 2012, 06:49 PM
Lynnsabcs is offline
Find More Posts by Lynnsabcs
Registered User
United States, TN, Knoxville
Joined Oct 2012
32 Posts
On the way back from Nashville, I wondered if the aileron not working was on the side of the plane that hit the tree branch enough to nick the edge of the wing about 3/4". It was.

Took off the engine cover on that side. With the battery connected to the plane and radio turned on, the servo is centered and will not react to control. Turn off the radio, and the servo moves full forward to the front of the plane and the aileron moves down. The gears on the servo don't look out of alignment or anything on the servo damaged.

Is the servo toast?

Before I tried to reverse the servos by turning the thottle full forward and holding the aileron control to SW and plug in the battery of the plane, both servos were working up and down, except they were moving in the same direction.

Any ideas?

Lynnsabcs is offline Find More Posts by Lynnsabcs
Reply With Quote