Originally Posted by CarlMalone
My aileron servos seem pretty happy but I do have some binding on my flaps. I think that the connector at the servo is hitting the post but its hard to tell. I may try moving the servo arm toward the trailing edge by one or two splines.
Just starting to test fit some of the hardware. Yes the flap mechanics and linkage don't look like they will do the job. Plan B. I'm thinking my flap drive is going to be on the bottom of the wing as I'm sure I'll want 3 times the suggested flap travel of 25 degrees. Has anyone figured out the wing section? Mine measured about 9.25% thick with measurable undercamber. Does not seem like the thicker almost flat bottom S 3021, or is the SD3021 labled on the box something new?