View Single Post
Old Oct 25, 2012, 08:39 AM
Jeff Watt is offline
Find More Posts by Jeff Watt
Registered User
Joined Dec 2004
169 Posts
Quote:
Originally Posted by carnisser View Post
the fail safes are real, in flight video post but I have not really there are times when the RSSI drops to 0 for half a second and the receiver stops sending the osd ppm active so the osd fail in half a second, then quickly recovers 50% of RSSI, I did that test at low power with short antenna and the signal from 50% to 6.5 km is normal and good for my position on the ground, with the same equipment setup using the v1 did not have this problem, no rx fault because I've tried it with several and all is the same, I am sure that the fault is in the issuer ranging output power and has intermittent fast descents.
Range tests using the above 40 steps micropower
Actually, Carnisser is using micropower to range check (that's new in the latest version) and 20ft is considered a good range check with micropower, not 20 meters.
That's part of the big fiasco right now. No one can keep all these versions straight.
I've had my DL now for 3 weeks and can't fly it while waiting for the fixes in the latest version, cables, etc. Frustrating.
Jeff Watt is offline Find More Posts by Jeff Watt
Reply With Quote