View Single Post
Old Oct 24, 2012, 05:46 PM
stingeragents is offline
Find More Posts by stingeragents
Registered User
Joined Jan 2011
1,105 Posts
Yea. Think i got the exit figured out. Intake is a bit harder on profile planes. Anyways flight report on 4s. First toss it was super twitchy. Ended up hovering across the field a ways so i landed. My elevons were in the exhaust duct. I tore part of them off and relaunched. Flew beautifully. Only had a 1000mah batt in so i kept the flight real short. Speed was good. Id say at least as fast as a stock jpower 50mm at full throttle. Somewhere around 70 maybe. Didnt test vertical. It will slow to a crawl though. Auw with a 3s 2200 was 22.5oz. Didnt weigh with the 4s i flew. Basically have to force land it as it was flying no problem with like 1/8 throttle. Gonna try and lighten it up some. I used a fair amount of hot glue which probably hurt in the weight department. Cant fix that now. Need to do some sanding
stingeragents is offline Find More Posts by stingeragents
Last edited by stingeragents; Oct 24, 2012 at 06:19 PM.
Reply With Quote