Originally Posted by aerocal
The bug is much simpler than what you are thinking.It is not only aileron but any swash channel that is reversed.It affects the endpoint adjustment only.What happens is that when you highlite the endpoint to be adjusted on a reversed swash channel it is actually the opposite side of the channel that is being adjusted.The workaround is to highlite the side opposite of what you want to adjust.Then change the value and move the stick back to the other side to check the result of changing the value.
Ahhh, ok, so it only comes into effect if you are adjusting endpoints and then the adjustments are backwards/swapped - got it. In some warped way I suppose it could almost make sense! Thanks.