Thread: Discussion T600 stretched to a T700
View Single Post
Old Oct 16, 2012, 12:26 PM
cap231ex is offline
Find More Posts by cap231ex
Track clear , smoke on !
cap231ex's Avatar
3 miles from AMA HQ Muncie, IN.
Joined Jan 2009
1,789 Posts
Originally Posted by JoseReyes69 View Post
RC Aerodyne has these parst for the conversion....
All that is , is a 700 boom and a 700 TT which ends up making it longer then an actual 700 unless you cut both down.

Originally Posted by SteelHeadz View Post
Cap, what's your final tally on the HK600 stretched to a 700. What parts and part numbers did you get to make this work?. I see this thread is pretty old but im hoping to wake y'all up.
Basically all one really needs is the belt , a 700 boom (which gets roughly 49mm cut off of it to make the correct 700 length) , 680-710mm blades, and I installed the Thunder Tiger 8t pulley on the rear of my tail rotor gearbox to speed up the tail.

Other than that maybe re-gear (lower pinion) or go with a lower Kv motor , I went with a Z-power A-50 780Kv motor and an 11t pinion running on a 6s pack on mine.

Yeah this is an old thread sence this I have stretched a T500 into a T550 , a T500 into a T600 , and a T450 into a T500 all with great success.
cap231ex is offline Find More Posts by cap231ex
Reply With Quote