Originally Posted by UAVProducts
First thing first is to test V1 or V2.
Sounds as if you have the RX as far away as possible and not mounted on top of the DJI.
This not knowing thing is driving me crazy. I hate it, I really do.
Tested it and all outputs measure .832 mV So I gather it is OK and indeed the "new" FC.
Below are some pics of the layout. The satellite receiver is mounted on landing leg and all other components are as far away as possible from each other.
The IMU is also not touching sides as I filed the hole slightly bigger. Connector pins on plate also seem to be fine.
I so wish there was some form of datalogger. We need to get to the bottom of this and need to feel a lot more comfortable flying this bird.