Originally Posted by erkq
That was the voltage regulator shutting down. Some have put a little heat sink on that too. But the VR shutdown is extremely unusual. You loose everything... servos included.
You loose everything---YEP!!!---For about 3 seconds then everything is OK as long as you are at low throttle...
I have a heat sink that I can cut up to use on the VR...I just need a pic as to where to place the heat sink...I tried the 3S battery on a 2300kv motor...The motor didn't cut out as quickly as it did with the 2500kv motor, but none the less, the motor still cut out..