Thread: Discussion Walkera DEVO Tx Hacking
View Single Post
Old Oct 14, 2012, 07:48 PM
magic_marty is offline
Find More Posts by magic_marty
<Marty>
United States, KY, Springfield
Joined Jul 2011
2,236 Posts
how i set mine is the on the mixer page select ch that the gyro is on..mine was 7
complex mixer
page 1 ...switch= mix0 (or gear if you want)
Src=ch5
curve=Fixed
Scale=90
Mux=replace

page 2
switch=mix1
Src=ch5
curve=fixed
scale=80
mux=replace

page 3
Switch=mix2
Src=ch5
Curve=fixed
scale= -95
mux=replace

with it set this way i have 3 selectable gyro values...1 is 90% , 2 is lower at 80% and 3 is set to a negative value to set the gyro in rate mode

just a example on how i did it..
magic_marty is offline Find More Posts by magic_marty
Reply With Quote