Originally Posted by zeus3313
Which servo fits and works best?
This is the setup I was going to use ..Not that fast I was told around 100-115 mph:
Himax 3514 2900KV APC 6x5.5E Pheonix ice 75
The HS65's and HS5065's should fit straight in the servo wells, the bigger HS85's and 5085's will need you to remove some foam.
If that's the MPX recommended motor, I thought it was good for 125mph-ish?
Anyway, the MPX servo's (nano's?) are very similar to HS65's, so on a setup for 115mph the 65's should be fine. I use the 85's, I just prefer something a bit stronger than HS65's, but use them (65's) a lot in my moulded gliders. But it also helped I had 2x HS85's in the spare's box when I built the FJU.