Originally Posted by Tumppi T
I tryed that today....the tail ESC didn't function without that red wire from converter to ESC
Well, you guys are doing better than me. I can't get it to work at all.
I tried with both the red wire hooked up and not hooked up. The ESC arms properly, but never supplies power to the brushless motor when moving the throttle and rudder.
I checked the ESC/motor using my servo tester and they function fine.
I checked the PCB tail plug and it has power when the throttle/rudder stick is moved. The blue with is positive and white negative and that is how I have hooked the the converter. Either I am missing something, or my signal convertr is a dud.