Originally Posted by Japac
It was a tight fit, I had to solder the capacitators off the esc and put wires on them to extend them, so they can sit under the esc so the motor and esc sits in the nose of the plane and the battery sits under the wing. I can take some pictures tomorrow.
I see. And no issues with the thickness of the lipo pack? Or did you move out the servos to the wing? I'm using a 1800mAh 2 cell pack and I thought squeezing in something thicker would just not work. On the other hand I can only manage wot bursts of 2-3 secunds so I'm OK with the speed
I'm using a HET Typhoon EDF 2W with a KV of 4600 and a 4.75 x 4.75 APC.