View Single Post
Old Oct 13, 2012, 10:48 PM
Scorpio9999 is offline
Find More Posts by Scorpio9999
The only R/C pilot in the city
Scorpio9999's Avatar
Kazakhstan, West Kazakhstan Province, Aksay
Joined Sep 2012
314 Posts
Quote:
Originally Posted by Shimmy View Post
Clevis and Control rods.

I am getting (probably) a Bixelr-1 kit sometime this week. I want to get spare clevis and control rods for the aileron ( I am likely to screw up the ones that come with it like I did last time) and shipping weight will not cost me.

I know that I asked this before, but no one had the info handy then. If I understand, the stock control rods are too thin for standard clevis thread. I would get new rods and clevis if I knew which ones to get.

Can anyone point me at rods & clevis that will work?

Thanks
As I posted before, my stock clevis was broken in the first crush (or the clevis was the reason of crush). As part of repair job I replased default parts with these:

Clevises
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8421

Push Rods
http://www.hobbyking.com/hobbyking/s...idProduct=9887

Linkage Stopper
http://www.hobbyking.com/hobbyking/s...idProduct=8414


During build I also used:

Hinges
http://www.hobbyking.com/hobbyking/s...idProduct=8282

Control Horns
http://www.hobbyking.com/hobbyking/s...idProduct=8419

I hope it helps.
Scorpio9999 is offline Find More Posts by Scorpio9999
Reply With Quote