Thread: Help! Wiggle Waggle Woes
View Single Post
Old Oct 13, 2012, 04:43 PM
finguz is offline
Find More Posts by finguz
Registered User
finguz's Avatar
United States, CA, San Diego
Joined Mar 2012
2,575 Posts
Quote:
Originally Posted by Chubbs View Post
Gyro gain is plugged into channel 7, or the Aux 2 channel, as recommended by the JR manual.

I had a very brief test flight yesterday, as winds were 10-15mph and gusting. But my problems appear to be fixed! (or at least 90% fixed...good enough). The tail rotor really lacks authority now (since the travel has been cut down so far), but at least the wiggles are gone.

WIth the vibration issue fixed, I'm making other adjustments to see if I can get some responsiveness back. I've moved the ball link 2 holes out on the control arm to get some travel back. I've also plugged the gyro gain plug into channel 5, the gear channel, so see if I can get the TX gain to do anything with that channel. Clearly "Aux 2" didn't do anything like the instructions said they would.


Edit: By the way, I finally found a thread here http://helifreak.com/showthread.php?t=290655 that seems to back up my theory that the metal plate was causing my problems. It seems like some setups just don't work well with the metal plate.
Let us know how using the gear channel works out for you. Some transmitters, to set gain, actually go from -100% to +100%. My spektrum is like that, and rate mode seems to start for me at -11%, or if my gear channel was reversed it would be +11%.
finguz is offline Find More Posts by finguz
Reply With Quote