Found 2 GWS retracts that fit the brackets in the wing. Best thing is I need weight in front of the COG point.Might as well do a pull-pull setup with a H 55 or smaller. I have stock & some 1 1/2" wheels.
Anybody know of a good scale side view .showing the wheels down. See if the 1 1/2" are sized close enough.
weight gain looks like about .7 to .8 oz.
Have to add a small wood block on the wingtip end of the black plastic block to hold a piece of shaft thru it to get the servo to PULL the gear down. that way there is a rock solid down lock everytime. Details Details......I just love it.