View Single Post
Old Oct 13, 2012, 01:42 AM
dennyrowland@mac is offline
Find More Posts by dennyrowland@mac
Registered User
Joined Aug 2005
238 Posts
Quote:
Originally Posted by UAVProducts View Post
Denny Denny Denny,

We do think a like.

Time to open up the UAVProducts.com Skunkworks.

This is our ZenHeliCam with the Zenmuse. We are using PH boom (frame mounts) and Paul made us a set of Boom to Z15 adapters.

This is based on the Henseleit TDR that we modify. We have 3 in stock. The platform is for the larger Zenmuse to come. The one in the video is only a 700mm but all the others are 800mm versions. By far the smoothest heli and the most Industrial high quality design heli we have ever used. The simplicity of the design and low parts count is amazing. The head as you mentioned is great at low head speeds. Our custom battery try can take 12s 5000mah (2 lipos) or 4 for long duration (10,000mah or more).

We abandoned the VarioCam we designed and now just offer the ZenHeliCam.

We will post more once we finish a few little things. The booms still need to be trimmed down and our electronics box slightly modified to handle the can bus from the Zenmuse. The funny thing is these don't cost that much more (and sometimes less) than Multi rotors.

They are special order.

http://www.youtube.com/watch?v=ef21fKriEVE&feature=plcp
Nice one
I'm still working on production molds for the carbon swinging arm mount adapter. Buggy shocks. But more or less the same layout as yours. The unit also supports the two 11 amp. maxamp batteries to add a little mass the assembly. Any idea when you might see the Zen big brother?
dennyrowland@mac is offline Find More Posts by dennyrowland@mac
Reply With Quote