View Single Post
Old Oct 12, 2012, 12:31 PM
JP9 is offline
JP9
Find More Posts by JP9
JP9
Gopher it!
United States, AZ, Surprise
Joined Feb 2012
32 Posts
Quote:
Originally Posted by quadracer View Post
Progress so far: All formers in and glued, battery tray and top plate dry-fitted. I want to wait until tomorrow to glue the last pieces, just in case I think of something I forgot.

I was quite impressed that the MB kit includes pretty much the entire front half of the plane, sans gear, of course.

It was really straightforward, the hardest part being getting the first former in front of the wing tube wedged into place. I ended up debonding the tube to allow the fuse sides to seperate.

Pretty much just a process of tearing out the broken stuff, taking an inventory of what needs replaced, and putting the new pieces in. (In my case, I used eery piece in the kit.... )
Some "before" pics
Attachment 5223977
Attachment 5223978

"During"
Much of the mangled pieces removed
Attachment 5223979
Attachment 5223980

First three formers installed; An important note.... You want to install the landing gear plate before you put that third former in. (Ask me how I learned that..)
Attachment 5223981
Attachment 5223982
Attachment 5223984

Fourth former and battery tray installed
Attachment 5223986

Finished mock-up before gluing it all together
Attachment 5223990

The kit includes the entire top plate and magnets, all the way to the back of the canopy. I didn't need that much of it, and didn't feel like debonding all of that, so I'm splicing it in, right behind the landing gear former.
Attachment 5224003

It took me roughly 1.5 hours to get this much done, so it's not too terribly time consuming. Plus, I'm starting to find repairs to be somewhat therapeutic.
That is nice work. Thanks for sharing. That should inspire me to take a stab at repairing once I destroy mine. You didn't have to make any repairs to the covering?
JP9 is offline Find More Posts by JP9
Reply With Quote