Thread: Discussion Walkera 4F200 3 blade head
View Single Post
Old Oct 12, 2012, 07:24 AM
ChopperJack is offline
Find More Posts by ChopperJack
Moving Parts
ChopperJack's Avatar
United States, MS, Columbus
Joined May 2011
1,854 Posts
Quote:
Originally Posted by razorblade View Post
So why is Resolution and Frame Rate important? Because you'd want a transmitter that matches well with the AR7200BX. Although my DX6i is working just fine with the AR7200BX, I currently do not know what the DX6i specs are for frame rate and resolution. The DX7s is speced at 11ms and 22ms frame rates and up to 2048 resolution.

The explanation of resolution gets more interesting...


I swear on the 4F200 with the Futaba S3154 cyclic servos, after I installed the AR7200BX, I was able to get more travel on the servos. This is comparing to when the Walkera 2601 TX was used with the S3154 servos. So I am guessing the DX6i has higher resolution than the 2601?

Still learning... I am.

Something I've noticed on my 2801pro tx - the trim adjustments seem to be at a different (more corse) resolution than the sub trim. It seems like maybe 1.5 to 2 clicks of trim = 1 click of sub trim.

my 2c
ChopperJack is offline Find More Posts by ChopperJack
Reply With Quote