View Single Post
Old Oct 11, 2012, 08:58 PM
Sparken57 is offline
Find More Posts by Sparken57
*GRAVITY* I hate it :(
Sparken57's Avatar
USA, CA, Downey
Joined Jan 2010
433 Posts
the camo

Originally Posted by Freddie B View Post
To apply I found the best method for these models was to wet the surface of the foam (painted or un-painted) with Water Based Poly Urethane (WBPU), (I use Polycrylic, Minwax brand, satin).

A quick but complete wipe with my glue stick to the back of the deacl, I place it where I want it, over the damp WBPU spot.

Immediately, I add some drops of WBPU to the top of the decal, rubbing it from center out, making sure to get it completely wet. Also make sure the edges get wet too.

I wipe the excess off, or, spread it outward past the decal, until most of the WBPU is gone, or starting to look dry.

Any wrinkles, folds, etc, you can work out now, by gently, but firmly, rubbing the decal itself.

The WBPU starts to dry real fast, so get it right now, and move to the next. It won't be completely dry for maybe a day (undeneath), but it will suck down to the surface and after an hour or so, you would have to scrape and sand these decals off!

No color bleed, or other problems noticed. Worked really well.

Hay Fred love this thread is the blue camo done with paint in layers?
Sparken57 is offline Find More Posts by Sparken57
Reply With Quote