Originally Posted by Shimmy
I hate to nag (a third time) however I want to order a new Bixler2, however I know that the HXT900 has short leads. I want embed extension wires in the wing to a "junction box" in the wing where I will connect the servo to the extension.
How long a servo extension do I need for the Ailerons and how long do I need for the flaps?
Please, if someone could measure their wings I could order a new plane.
I normally buy in bulk servo extension leads. I bought ten 60 CM leads for 5 $
then I measured how long i need and I get my soldering hiron and shorten or extend them . If you do not know how to solder then measure the distance give it a couple of inches of slack and order them of the nearest lenght .
The motor wires are coming all in 1 mtr lenght so buy a meter and cut it to lenght it has to be high current wire with silicon vest for the heat. You will need to solder the motor connectors though therefore you need to buy the bullet connetctors as well for th motor
It is question of the chicken or the egg.
. I frankly think you need the plane before you make a list up. However just go through all the previous mailing and pick the one you need.