Originally Posted by Aros
What's the best do-it-yourself method for moving the hub forward a couple MM's from the cowl? Assuming FMS won't have that part fixed in time for my replacement version? I'm going to need to do it to my 1700 P-47 as well.
I would either add washers behind the "X" motor mount, Between it and the fire wall, or sinply add another "X" motor mount to the 2 that are already included...(That is what I did) (You will also probably need some longer screws as well (the 4 that mount the motor to the fire wall)
Just add another one of these with some longer screws from either BH or RC-Castel