View Single Post
Old Oct 08, 2012, 11:36 PM
Zangetsu57 is offline
Find More Posts by Zangetsu57
Registered User
United States, CA, Oxnard
Joined Sep 2010
346 Posts
Quote:
Originally Posted by Scorpio9999 View Post
Paul,
I purchased these clevises.
http://www.hobbyking.com/hobbyking/s...idProduct=8421
Originally I assembled Bixler with default clevises and rods for ailerons. I crushed on third flight (tip stall) and found rod separate from plane with broken clevis. Reason of the crush?
Now my rods looks like this.
Attachment 5212343
Also you can see mod to fix tail. May be you want do this way.
Attachment 5212344
Just drill small default hole with drill bits MANUALLY with step of 0.5 mm to 6 mm.
You can see small piece of tube (taken from pen) hot glued on leading edge. It prevent rudder rod from unneccessary bend. When it's bend rudder works worse.
In fuselage I glued small piese of tube (taken from foam sprey) which hold 6x75 mm nylon bolt in proper position and doesn't allow smash the fuselage when you screw it in.
Attachment 5212345

And finaly custom motor mount made from PVC adapter from 20 to 30 mm.
Attachment 5212347
I like your PVC motor mount! Would you mind explaining exactly what type of adapter it is? I live in the USA and unfortunately PVC is measured in English units. Do you think a 3/4" to 1 1/4" adapter would work?
Zangetsu57 is offline Find More Posts by Zangetsu57
Reply With Quote