Thread: Discussion Xplorer Mk. II
View Single Post
Old Oct 08, 2012, 07:02 PM
webbsolution is online now
Find More Posts by webbsolution
Win=span\massXpractice+lu ck
webbsolution's Avatar
Joined Jul 2007
3,686 Posts
Quote:
Originally Posted by ak79 View Post
What battery were you using ? (type and voltage) 5cell eneloop

What Radio system are you using (tx and rx, voltage reg ?) SD10, 10ch rx, no reg

What harness were you using ? I make my own, 26 gauge twisted wire

at full deflection did yours servos hum or buzz ? They were buzzing for sure

I don't think it had anything to do with the harness or battery. I am going to have another look at my linkage as I rushed to build the plane in time for the comp.
Agreed a 6 volt enloop pack "should" not cause that issue. However ANY impedance phsyically will really load up those servos and especialy the pots - Thats the only way I killed 809s - at full deflection I really worked hard to make sure there was no strain on the servos (no buzz) so that when I pulled the stick all the way I had only the airflow to fight and not friction or contact with the subspar or skin etc.

However it does not suprise me that your X survived unscathed. Those models are ___ing tough!
webbsolution is online now Find More Posts by webbsolution
Reply With Quote