View Single Post
Old Oct 08, 2012, 02:22 PM
Little-Acorn is offline
Find More Posts by Little-Acorn
Registered User
San Diego, CA
Joined Dec 2006
1,280 Posts
Quote:
Originally Posted by G-LO View Post
Hey man, Nice find!

The motor that I bought there is the size of the stock motor, but the windings isn't as extensive. I'm wondering if it will do any better in the long run? I'll see after I get everything in place.
The one I mentioned is nice because, from the data presented by HeadsUpRC, it looks like I can plug it in (once I get the motor mount figured out) and use it with my present 60A ESC and 4s battery setup, and get 500+ Watts with the APC 9x6E 2-blade prop that's already in my field box... and may be able to try the 9x6 three--blade too, also with 4s.

And then if I put in a 100A or so ESC and 5s battery, it might approach 800-1000W with the 9x6 3-blade, and maybe more static thrust than the weight of the plane (presently weighs about 82 ounces).

Quote:
Originally Posted by HeadsUpRC
http://www.headsuprc.com/servlet/the-2246/Emax-BL3526-fdsh-04-Outrunner-Brushless/Detail

Propeller data for the BL3536/04 using a 5-cell Lipo battery:

APC 10 x 5E: 112 oz thrust at 52 amps (1000 watts)
APC 9 x 6E: 92 oz thrust at 47 amps (930 watts)

Propeller data for the BL3526/04 using a 4-cell Lipo battery:

Master Airscrew 11 x 7 x 3 (3-blade prop): 99 oz thrust at 60 amps (910 watts)
APC 10 x 7E: 83 oz thrust at 47 amps (730 watts)
Master Airscrew 10 x 7 x 3 (3-blade prop): 91 oz thrust at 49 amps (750 watts)
APC 9 x 6E: 66 oz thrust at 34 amps (530 watts)
Little-Acorn is offline Find More Posts by Little-Acorn
Reply With Quote