Originally Posted by Davie79
Na I didn't have that set right so thanks man. It's a bit hard to work out with no instructions but I'm getting there
I guess you charge has a balancing port ... just remember to use it all the time for balance and charge the lipo on the same time ...
If you overcharge a single cell .. it may either puff or even get on fire (in very extreme situation) ...
My charger are old ... I'm in RC since too long, when I got my charger for LiPo the balancing stuff was still not very well defined ... anyhow ...
I got time ago this: http://www.hobbyking.com/hobbyking/s...System_6S.html
And not only I can use the battery status or balance, discharge (better store lipo with 3.8 volt per cell) ... but it bring back alive my old charger.
About the lipo that fit nice on the Silverlit .. I'm using this one: http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
I have seen there is even a higher C : http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
But is looking a waste of money .. since the 35C is more then enough for the silverlit