View Single Post
Old Oct 07, 2012, 06:27 PM
jackerbes is offline
Find More Posts by jackerbes
USA, ME, Ellsworth
Joined May 2008
18,096 Posts
Are you aware of the timocharis thread on that wind, that has an explanation of it:

Winding Half-Parallel dLRK Delta -

It is a wind that works very well on this motor. I have done three of my DAT-750's with it. As far as explaining it, I'm at a loss on that.

One point of confusion on it for me was that if you do a 20 turn wind Half Parallel dLRK wind you get the Kv that you would get from a 10 turn dLRK wind. So most of the winds that were used on DAT-750's were around 20 turns and terminated "Y" to get Kv's down around 800 or so

The attached image is the one I use, it was posted by Truglodite. There is another image for it around that manuel_v did that brings the motor leads out better if you are going to do a Delta term version.

jackerbes is offline Find More Posts by jackerbes
Reply With Quote