Originally Posted by sparks
Yester day was a learning experience.
She still tries to tip stall when it gets slow, it's just the nature of a wing with this shape. Some wash out would improve this but I just plan to keep it at 1/4 throttle until it gets close to landing.
A thought before I start my build - putting a 1 or 2 degrees of washout in your wing method would be reasonably easy - how about increasing the wing %depth at the tip; my experience has been fatter tips help ward off tip stall and this might be simpler to build in ? What do you think ?
Is this similar to the motor you used http://www.hobbyking.com/hobbyking/s...idProduct=5430
AX 2308N 1800kv Brushless Micro Motor